Call now to get tree help like tree cutter, tree clearing, bush lop, shrub remove, stump pruning and plenty of other across USA:


Call now

Call us now +1 (855) 280-15-30






You should upgrade or use an alternative browser.

Feb 25, To successfully remove a motorcycle swing arm bushing (#4 on the CB drawing), you’ll need the following: a 15mm socket. a 3/8 bolt that is inches long. a hammer. Place the swing arm in a vice with wooden inserts to protect the metal swing arm.

Make sure to secure the swing arm in a position to maximize the force that you hammering Estimated Reading Time: 50 secs. Follow the build on treelop.buzz Removing swing arm bushings on a Honda CB Super Sport (F) motorcycle.

Requires a vice with wood blocks. Swing Arm Bushings. Fits: CBK, CBLLimited models with bronze swingarm bushings. Improve Handling. These are a must! High Quality Parts, Machined to exact tolerance, featuring Spiral Grease Cut to retain grease where its needed. /images/treelop.buzzed Price:Top» Catalog» CB Chassis Parts & Services»Swing Arm Rebuild.

Custom Swing arm rebuild services, including custom made and fitted bronze swing arm bushings. Note: DO NOT send payment with swingarm. Costs will be sent to you before work begins, in case the arm is not rebuildable (i.e., bent or wrecked somehow). Jun 29, K8 cb Bronze swingarm bushing. «on: June 28,am».

Ordered a set of these from vintagecbcom. When I removed the collar from the swingarm with OEM plastic bushings it was tight.

You are using an out of date browser.

New bronze bushing fits tight in swingarm, collar is not when sliding into bushing and has a tiny bit of play. Jul 01, Jun 28, #1. Ordered a set of these from vintagecbcom. When I removed the collar from the swingarm with OEM plastic bushings it was tight and had to be hammered out. Collar is the part the swingarm bolt goes through to mount to frame.

New bronze bushing fits tight in the swingarm. Describes one method for removing and installing swing arm bushings. This technique can also be used for other applications, such as steering stem/head bear. Jul 23, You just need to find a bearing that has an inner diameter that matches your current swingarm bolt and an outer one that is the same or slightly larger than the swingarm. Then you just make it fit. Also, you may need to remove the inner spacer because it no longer does its job and replace with a custom.

Jul 06, Some swingarm bushes are made from plastic or have a rubber component that will melt or distort when heated to degrees F during powdercoating. this is is why some people opt to remove them prior to powdercoating. On my BSA I left the bushings in with threaded rod and washers covering them and they survived the heat of the oven.